You want your dishwasher to perform as efficiently as possible – from removing dirt and debris from dishes to ensuring that they are sparkling. Many of us rely on dishwashers to perform all these tasks and more. However, we are not aware of the impact of temperature on performance. Here’s all you need to learn about the dishwasher, from how it works to the ideal temperature for washing and what to do when the temperature is not high enough.
What is the best temperature for dishwashers?
The temperature of a dishwasher is set to ensure that it runs as efficiently as possible. The average temperature of a dishwasher’s main cycle is between 51 and 60 degrees Celsius. The temperature of the water in the dishwashing machine must be high enough to dissolve and activate the detergent, as well as remove any food or grease residue. The water temperature is raised to around 80 degrees Celsius during the rinse phase to ensure that the dishes can be eaten from.
Food safety and temperature
Hands cannot tolerate temperatures above 60 degrees Celsius. Dishwashing temperatures are usually higher. The hotter the water is, the better your dishes and cutlery will be cleaned. For a Fully Integrated Dishwasher Bromley, visit //www.wellingtonshomeelectrical.co.uk/dishwashers/fullsize-dishwashers/fully-integrated
How to tell if your dishwasher’s water temperature is not hot enough
You can tell if the water temperature in your dishwasher is too low by noticing certain signs. For example, if dishes are not as clean as you would expect or if dishwasher detergent tablets have not dissolved completely. Consult your hot-water heater manual or a technician for help adjusting your settings if you suspect that your water temperature is below 50 degrees Celsius.
Can a dishwasher be damaged by water that is too hot?
High temperatures and poor maintenance can damage your dishwasher.
